9
OPERATING INSTRUCTIONS
• Turn on water supply at the faucet to completely
open.
• Make sure the “ON/OFF” switch is in the “OFF”
position. The power switch has international symbols
for ‘on’ and ‘off’: On (|) Off (O).
• Unwind the power cord completely and plug the
NEMA plug into a grounded 120 volt outlet.
• Release safety push trigger lock up and back into
trigger. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose. Push trigger lock back down
to lock back into place.
ASSEMBLY INSTRUCTIONS
8
K
A
Garden Hose Adapter Installation
Attach collar of garden hose adapter (K) directly to
power washer water inlet (A). Hand tighten.
1
9
K
Attach garden hose to the garden hose adapter (K).
Note: Flush out garden hose before connecting
to garden hose adapter.
You have now completed assembly and are ready to
begin using your electric power washer. Read and
observe all safety instructions.
94260_PJR 2000 PC ENG-FR-SP .indd 9 17/2/17 上午10:14
To Next Page
Loading...
