Do you have a question about the Powerplus POWC10110 and is the answer not in the manual?
Type | Hammer Drill |
---|---|
Chuck Size | 13 mm |
Speed | Variable |
Power Source | Corded Electric |
Chuck Type | Keyed |
Drilling Capacity Steel | 13 mm |
Drilling Capacity Wood | 25 mm |
Cable Length | 2 m |
Rated Frequency | 50 Hz |
No Load Speed | 0-3000 rpm |
Impact Rate | 0-48000 bpm |
Rated Voltage | 230V |
Impact Rate (bpm) | 0-48000 bpm |