Powerplus POW30543 - User Manual

To Next Page

POW30543 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION (FIG. 1) .................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Working area ........................................................................................................... 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 SAFETY REGULATIONS ................................................................ 4

7 BEFORE STARTING WORK ........................................................... 5

7.1 Fitting and changing tools (Fig 2) .......................................................................... 5

7.2 Removing SDS-plus tool (Fig 3) ............................................................................. 5

8 STARTING WORK ........................................................................... 5

8.1 Switching ON/OFF ................................................................................................... 5

8.2 Handle attachment (Fig 4) ...................................................................................... 5

8.3 Depth stop (Fig 5).................................................................................................... 5

8.4 Dust collection device (Fig 6) ................................................................................. 6

8.5 Hammer stop ........................................................................................................... 6

8.6 Drill Stop (Fig 7) ...................................................................................................... 6

9 CLEANING AND MAINTENANCE ................................................... 6

10 TECHNICAL DATA .......................................................................... 6

11 NOISE ............................................................................................... 7

12 WARRANTY ..................................................................................... 7

13 ENVIRONMENT ............................................................................... 7

14 DECLARATION OF CONFORMITY ................................................ 8

Need help?

Do you have a question about the Powerplus POW30543 and is the answer not in the manual?

The Powerplus POW30543 Hammer Drill 900W is a versatile power tool designed for hammer drilling and chiselling in stone and concrete. It is intended for non-commercial use.

Function Description

The hammer drill operates by combining a rotary motion with a hammering action, making it highly effective for penetrating tough materials like stone and concrete. It features an SDS-plus attachment system, which allows for quick and secure changes of drill bits and chisels. The device is equipped with an On-Off switch for straightforward operation. For enhanced safety and control, an auxiliary handle is provided, which can be adjusted to achieve a stable working position. The hammer drill also includes a depth stop, enabling precise control over drilling depth. A dust collection device can be attached for overhead hammer-drilling work, helping to manage dust and maintain a cleaner working environment. The tool incorporates a hammer stop facility, allowing the user to deactivate the hammer action for smooth drilling when needed. Conversely, a drill stop feature enables the deactivation of the drilling action for chiselling tasks.

Usage Features

Before commencing any work, it is crucial to read the safety warnings and instructions thoroughly. Always ensure the power supply matches the voltage specified on the rating plate. When working outdoors, use an extension cable suitable for outdoor use. Prior to operation, inspect the work area for hidden electrical cables, gas, and water pipes using a pipe finding device.

To fit a tool, clean and grease it with a thin layer of machine grease. Pull back and hold the fastening sleeve, then push and rotate the dust-free tool into the tool holder until it locks automatically. Verify that the tool is locked by pulling it. To remove a tool, pull back the fastening sleeve, hold it, and then remove the tool.

To switch the device on, press the operating switch. To switch it off, press the operating switch briefly and release. The auxiliary handle is essential for safe operation and should always be used. It can be rotated and tightened to achieve a secure body position. The depth stop is adjusted by loosening the handle attachment, placing the straight part of the depth stop in the hole, and then retightening the handle attachment.

For overhead hammer-drilling, pull the dust collection device over the drill bit. To deactivate the hammer action for smooth drilling, turn the lever switch clockwise to the designated position. To reactivate it, reset the lever switch. For chiselling work, the drilling action can be deactivated by turning the lever selector so that the arrow mark on the selector aligns with the arrow on the machine case. To reactivate drilling, reset the lever selector to its original position.

When hammer drilling, apply low pressure to avoid unnecessary load on the motor. Regularly inspect drill bits and re-sharpen or replace blunt ones as needed. Always wear appropriate safety equipment, including eye protection, a dust mask, non-skid safety shoes, a hard hat, and hearing protection, especially when working in dusty or noisy environments. Avoid operating the tool in areas with flammable liquids or vapours. Secure all workpieces sufficiently before drilling.

Maintenance Features

Regular cleaning and maintenance are vital for the longevity and safe operation of the hammer drill. Always disconnect the mains plug from the socket before performing any maintenance tasks. Keep the machine clean at all times. Avoid using caustic agents to clean the plastic parts; a mild detergent on a damp cloth is recommended. Ensure that water never comes into contact with the tool.

After use, to prevent dust accumulation, use compressed air (maximum 3 bar) to clean out the ventilation slots. Periodically check the carbon brushes; dirty or worn brushes can lead to excessive sparking and speed faults. If the device requires replacement after extended use, dispose of it in an environmentally safe manner, not with household refuse. Electrical machine waste should be recycled where facilities exist. Consult your local authority or retailer for recycling advice.

For any repairs, only an authorized customer service centre for Powerplus tools should be used to ensure that the device meets required safety standards and that only standard spare parts are utilized. Proper maintenance, including regular cleaning of ventilation slots and servicing of carbon brushes, is crucial for maintaining warranty validity. Keep your purchase receipt as proof of the date of purchase. If returning the appliance, it should be in an acceptably clean state, preferably in its original case, and accompanied by proof of purchase.

Powerplus POW30543 Specifications

General

Power source	Corded Electric
Chuck type	Keyless
Chuck capacity	13 mm
Drilling capacity steel	13 mm
Drilling capacity wood	25 mm
Drilling capacity concrete	13 mm
Cable length	2 m
Rated frequency	50 Hz
No load speed	0-3000 rpm
Impact rate	0-48000 bpm