Powerplus POWX0782 - Technical Data; Noise

To Next Page

To Previous Page

POWX0782 EN

12 TECHNICAL DATA

Mains voltage

220-240 V ~ 50Hz

Power

1800 W

Saw blade rpm

5000 min

-1

Saw blade dimensions

254 x 30 x 3 mm - 60T TCT

Cutting capacity :

As Table saw :

46 mm

As mitre saw :

0x90°

H70xW110mm

45°x90°

H40xW110mm

0°x45°

H70xW70mm

45°(L)x45°

45°(R)x45°

H35xW60mm

H40xW90mm

Machine dimensions:

700x585x420mm

Protection class (IP)

Insulation class

Weight gross/net

24 kg / 19 kg

13 NOISE

Noise values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

93 dB(A)

Acoustic power level LwA

106 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85

dB(A).

aw (Vibration)

1,7 m/s²

K = 1,5 m/s²

The engine retrieves the stated power of 1800 Watts in S6 25%

Main Page

Table of Contents1
Application4
Description4
Package Content List4
Symbols5
General Safety Warnings5
Working Area5
Electrical Safety5
Personal Safety5
Power Tool Use and Care6
Service6
Additional Safety Instructions for Cross-Cut and Table Saws6
Electrical Safety8
Special Product Characteristics8
Installation and Transport9
Installation (Fig. 14)9
Transport (Fig. 5, 12, 13)9
Cross-Cut and Mitre Saw Operating Mode (Fig. 6)10
Turntable (Fig. 7-9)10
Adjustment of the Bevelling Angle (Fig. 10-11)10
Mitre and Width Guide (Fig. 12-13)10
Connection to a Dust Collector10
Connection to AC Power11
Operations11
Cross-Cut Sawing Mode11
Safety Instructions for the Movable Saw Blade Guard (Fig. 16)11
Safety Lock (Fig. 2-3)11
Installation (Fig. 12 and 13)11
Normal Cross-Cut Operations12
Mitre Sawing (Fig. 7)13
Bevelling (Fig. 10 and Fig. 11)13
Sawing the Workpiece13
Double Mitre Cut14
Sawing the Workpiece14
Safety Instructions for the Saw Blade Guard (Fig. 12)14
Riving Knife (Fig. 12)14
Lower Saw Blade Guard (Fig. 12)14
Push Block (Fig. 17 and 18)14
Installation15
Sawing16
Cleaning and Maintenance16
Cleaning16
Maintenance16
For All Maintenance Works16
Before Every Use16
Monthly (if the Saw Is Used Every Day)17
Every 300 Operating Hours (Fig. 10)17
Changing the Saw Blade (Fig. 19-21)17
Tightening the Drive Belt19
Checking the Tension19
Renewed Tensioning (Fig. 23-26)19
Replacing the Saw Guide (21)19
Modifications20
Modifications on the Mitre and Width Guide (Fig. 27)20
Modifications on the Mitre Scale Indicator (Fig. 28)20
Modification of the Bevelling Angle Indicator (Fig. 29)20
Adapting the Sawing Depth Stop (Fig. 30)20
Cleaning20
Storage20
Technical Data21
Noise21

Powerplus POWX0782 - Technical Data; Noise

Table of Contents

Related product manuals