Powerplus POWXG30035 - 12 Technical Data; 13 Noise; 14 Cleaning and Maintenance; 15 Warranty

POWXG30035 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
12. TECHNICAL DATA
Rated voltage
230V
Rated frequency
50Hz
Rated Power
600
No load speed
7500 min
-1
Cutting width
350 mm
Line size
Φ1.6mm
Cutting system
2 lines/Intelligent system
Weight
2.6 kg
13. NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
85 dB (A)
Acoustic power level LwA
92 db (A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
4.60m/s2
14 CLEANING AND MAINTENANCE
Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance, switch off and unplug the tool.
 Regularly clean the ventilation slot in your tool using a soft brush or dry cloth.
 Regularly clean the cutting line and spool using a soft brush or dry cloth.
 Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
15 WARRANTY
 This product is warranted for a 36-month period effective from the date of purchase by the
first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.