IMPORTANT SAFE OPERATION PRACTICES
6
Do not modify engine
To avoid serious injury or death, do not modify engine in any way. Tampering with the governor
setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with
factory setting of engine governor.
Safety Symbols
This page depicts and describes safety symbols that may appear on this product. Read, understand
and follow all instructions on the machine before attempting to assemble and operate.
Your Responsibility-Restrict the use of this power machine to persons who read, understand and
follow the warnings and instructions in this manual and on the machine.
SAVE THESE INSTRUCTIONS!
WARNING
READ THE OPERATOR’S MANUAL(S)
Read, understand and follow all
instructions in the manual(s) before
attempting to assemble and operate
WARNING- ROTATING BLADES
Keep hands out of inlet and discharge
openings while machine is running. There
are rotating blades inside
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice
Keep children at a distance of not less
than 10m from the work area
WARNING-GASOLINE IS FLAMMABLE
Allow the engine to cool at least two
minutes before refueling
WARNING-CARBON MONOXIDE
Never run an engine indoors or in a poorly
ventilated area. Engine exhaust contains
carbon monoxide, an odorless and deadly
gas
WARNING-ELECTRICAL SHOCK ( for
engine with electric starter)
Do not use the engine’s electric starter in
the rain
Use ear protection
Use eye protection
WARNING-ROTATING AUGER
Do not put hands or feet near rotating
parts, in the auger/impeller housing or
chute assembly, Contact with the rotating
parts can amputate hands and feet
WARNING-ROTATING BLADES
Keep hands out of inlet and discharge
openings while machine is running. There
are rotating blades inside
WEARING-THROWN OBJECTS
This machine may pick up and throw
objects which can cause serious personal
injury.
Do not touch any rotating part before
machine stops
To Next Page
Loading...
