PowerTec 71395 User Manual

Owner’s Manual
Model No. 71395
Taper/Straight Jig
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Visit us on the web at powertecproducts.com
QUESTION...
1•847•780•6120
20-0903

PowerTec 71395 Specifications

General

Brand	PowerTec
Model	71395
Category	Tools
Language	English

Summary

Safety Rules

General Safety and Operating Precautions

Read all rules before operating, follow procedures, and be familiar with tool usage for safe operation.

Specific Hazard and Usage Warnings

Covers chemical exposure, modification cautions, and ensuring complete assembly before use.

Specific Safety Warnings

Blade Path Awareness and Power Off

Keep hands clear of the spinning blade and always turn off/unplug the saw before making adjustments.

Jig Setup and Workpiece Securing

Material and Component Usage Guidelines

Assembly

Miter Bar and Tapered Knob Assembly

Miter Bar Adjustment

Ensuring the miter bar slides freely forward/backward without side-to-side play for proper fit.

Trim Base to Fit Saw

Attach Hold Down Clamps and Fence

Operation

Taper Cutting Procedure

Detailed steps for making taper cuts, including fence adjustment, workpiece positioning, and cut execution.

Straight Line Ripping Procedure

Instructions for performing straight line cuts, including removing the miter bar and using the table saw fence.