INSERT A FLIP STOP (Sold Separately)
Slide the T-Bolt into the slot on the top of the Fence or 3" Fence
End (shown with 3" Fence End). Position the arm as needed
and tighten the AdjustmentKnob.
Figure 5
FEATURES
The Fence is equipped with a high quality 12" Movable Scale.
Calibrate the scale by using the corner edge of the ip stop (not
included) to identify the alignment point. Tighten the adjustment
knob on the ip stop to secure in place.
Figure 6
WARNING
When servicing, use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage.
To ensure safety and reliability, all repairs should be performed
by a qualied service technician.
WARNING
Keep the Telescoping Fence dry, clean, and free from oil
and grease. Always use a clean cloth when cleaning. Never
use brake uids, gasoline, petroleum-based products or any
strong solvent to clean the Telescoping Fence. Chemicals can
damage, weaken or destroy plastic which may result in serious
personal injury.
Southern Technologies, LLC • Chicago, IL 60606
Put these instructions and the original sales invoice
in a safe, dry place for future reference.
Visit us on the web at www.powertecproducts.com
To Previous Page
Loading...
