UNPACKAGING
Refer to Figure 1.
The machine is shipped complete in on container.
Carefully unpack the machine and all loose items from the
shipping container. Fig 1 illustrates the machine and all
loose items.
Check for shipping damage. A claim must be filled with
carrier if damage has occurred.
A Jointer bed assembly
B Fence
C Fence support
D Fence bracket assembly
E Locking plate assembly
F Fence sliding handle with spacer
G Push blocks (2)
H Fence tilting handle with spacer
I Dust chute
J Dust Collection Bag
K Dust Collection Clamp
L Dust Collection Wire
Hardware bag includes:
8-1, 25 x 25 mm socket head bolts (6)
8mm lock washer (6)
4 and 6mm hex wrench
6-1.0 x 25mm pan head screw
ASSEMBLY
2
Figure 1 - Unpacking
one
To Next Page
Loading...
