PowerTech PL800E User Manual

INSTRUCTIONS PL300E/PL400E/PL500E/PL800E SLIDING GATE OPENER USER MANUAL
9
LED Display Definition Function Value Description
Open Partially
(Pedestrian mode)
Pre-flashing
Over current reverse
setting
Open-stop-close-stop
function key
Open Partially function
key
External device control
function key
Photocell 1 function
Photocell 2 function
Emergency Stop Button
Remote Logic
8
9
A
C
E
F
H
J
L
P
8-1
8-2
8-3
8-4
8-5
8-6
9-0
9-1
A-0
A-1
A-2
A-3
C-1
C-2
C-3
C-4
E-0
E-1
E-2
E-3
E-4
F-0
F-1
F-2
F-3
F-4
H-0
H-1
J-0
J-1
L-0
L-1
P-1
P-2
3seconds
6seconds
9seconds
12seconds
15seconds
18seconds
The flashing light blinks when
the gate starts to move.
The flashing light blinks 3 seconds
before the gate starts to move.
Stop
Reverse 1 second
Reverse 3 second
Reverse to the end
A key
B key
C key
D key
No function in transmitter
A key
B key
C key
D key
No function in transmitter
A key
B key
C key
D key
Close
Open
Close
Open
Close
Open
Open-Stop-Close-Stop
Open-Stop-Close
1. The function can adjust the time of opening partially.
2. The factory setting is "8-2".
1. The factory setting is "9-0".
1. The factory setting is "A-3".
2. The reverse function only operate 3 times and then stop.
3. If gate reverses, the auto close function will be cancelled.
1. The factory setting is "C-1".
1. The factory setting is "E-2".
1. The factory setting is "F-3".
1. The factory setting is "H-0".
1. The factory setting is "J-0".
1. The factory setting is "L-0".
1. The factory setting is "P-1".

PowerTech PL800E Specifications

General

Brand	PowerTech
Model	PL800E
Category	Gate Opener
Language	English