PowerTech PW330L - User Manual

Need help?

Do you have a question about the PowerTech PW330L and is the answer not in the manual?

Summary

1. Product Description and Applications

1.1 Applications

Details the suitability of the gate openers for residential automation of single or dual leaf gates.

1.2 Description of The Automation

Explains terms and accessories of a gate automation system with a typical installation diagram.

1.3 Description of Devices

Lists and illustrates the various components and accessories included in the gate automation kit.

2. Installation

2.1 Notes of Motors in Operation

Provides general operational considerations and limitations for the gate openers, including weight and dimension influences.

2.1.1 Tools in Installing

Lists necessary tools and emphasizes ensuring they conform to industrial safety standards before installation.

2.1.2 Motors, Components and Its Installation in Illustration

Shows a basic wiring diagram and installation illustration for the motors and components.

2.2 Power Connection

Details the requirements for connecting the gate openers to the power supply, advising careful reading of the manual.

2.3 Preparation for Motor Installation

Outlines checks and criteria to ensure the gate is suitable and ready for motor installation.

2.3.2 Installation of The Gear Motors

Details the process of physically mounting and securing the gear motors to the gate posts and leaves.

2.3.3 PKS-1 Key Selector

Instructions for installing the PKS-1 key selector outdoors for gate operation without a radio transmitter.

2.3.4 PPB-1 Push Button

Instructions for installing the PPB-1 push button indoors for gate operation without a radio transmitter.

2.3.5 PF-1 Flashing Light

Details the installation process for the PF-1 flashing light, which indicates gate movement.

2.3.6 PH-2 Photocells

Instructions for mounting and connecting the PH-2 photocells to detect obstacles and ensure safe gate operation.

2.3.7 PEL-1 Electric Latch and PS-1 Stopper

Guides the installation of the electric latch and stopper for locking the gate, covering inward and outward opening.

3. Technical Characteristics

Model Specifications

Detailed technical specifications for the PW320, PW330, and PW330L gate opener models.

Accessory Specifications

Technical details for various accessories including photocells, key selector, push button, flashing light, transmitter, and latch.

This document describes the PW320/PW330/PW330L series of 24V DC gear motors designed for residential swing gate automation.

Function Description:

The PW320/PW330/PW330L are electromechanical gear motors primarily used for automating single or dual leaf swing gates. They operate on 24V DC power and are designed for residential applications. In the event of a power failure, the gear motors can be manually released using special keys to allow for manual gate operation. While back-up batteries are not intended for normal use, they are allowed for emergent operation during power outages. The system includes a control box with an incorporated receiver, transformer, and two back-up batteries, which provides complete automation for the gear motors and other accessories.

Important Technical Specifications:

PW320:

Motor: 24Vdc motor with mechanical release
Gear type: Worm gear
Max Absorbed Power: 144W
Peak thrust: 3000N
Nominal thrust: 2500N
Stroke length: 356mm with mechanical stop/400mm without mechanical stop
Power supply: 24Vdc
Nominal input power: 2A
Maximum operating current: 5.5A for maximum 10 seconds
Maximum gate weight: 250 kg per leaf
Maximum gate length: 3 meters
Duty cycle: 20%
Operating Temperature: -20°C ~ +50°C
Dimension: 819mm * 115mm * 106mm
Weight: 6.0kg

PW330:

Motor: 24Vdc motor with mechanical release
Gear type: Worm gear
Max Absorbed Power: 144W
Peak thrust: 3500N
Nominal thrust: 3000N
Stroke length: 350mm
Power supply: 24Vdc
Nominal input power: 2A
Maximum operating current: 5.5A for maximum 10 seconds
Maximum gate weight: 350 kg per leaf
Maximum gate length: 4 meters
Duty cycle: 20%
Operating Temperature: -20°C ~ +50°C
Dimension: 844mm * 115mm * 106mm
Weight: 6.25kg

PW330L:

Motor: 24Vdc motor with mechanical release
Gear type: Worm gear
Max Absorbed Power: 144W
Peak thrust: 5000N
Nominal thrust: 4500N
Stroke length: 540mm
Power supply: 24Vdc
Nominal input power: 2A
Maximum operating current: 5.5A for maximum 10 seconds
Maximum gate weight: 500 kg per leaf
Maximum gate length: 5 meters
Duty cycle: 20%
Operating Temperature: -20°C ~ +50°C
Dimension: 1039mm * 115mm * 106mm
Weight: 8kg

Accessories and their specifications:

PH-2 Photocells:
- Detection type: Through beam
- Operating distance: 25 meters
- Response time: 100ms
- Input voltage: AC/DC 12~24V
- Operating Temperature: -20°C ~ +60°C
- Protection class: IP54
- Dimension: 96mm * 45mm * 43mm
- Function: Detects obstacles on the optical axis between the transmitter (TX) and receiver (RX) to prevent gate closure on obstructions.
PKS-1 Key Selector:
- Application: For outdoor use
- Installation: Wall mounted vertically
- Operating Temperature: -20°C ~ +50°C
- Dimension: 85mm * 60.5mm * 40.5mm
- Function: Allows outdoor gate opening without a radio transmitter, supplied with two keys.
PPB-1 Push Button:
- Application: For indoor use
- Installation: Wall mounted vertically
- Operating Temperature: -20°C ~ +50°C
- Dimension: 85mm * 60.5mm * 40.0mm
- Function: Used for indoor gate opening without a radio transmitter.
PF-1 Flashing Light:
- Application: For warning purposes during gate movement
- Lamp: 24Vdc Halogens bulb
- Operating Temperature: -20°C ~ +50°C
- Installation: Horizontally or vertically installed
- Dimension: 205mm * 80mm * 75mm
- Function: Blinks when the gate is moving and stops when the gate finishes opening or closing.
PR-1 Radio Transmitter:
- Application: Remote control of PW320/PW330/PW330L
- Frequency: 433.92Mhz
- Coding: Rolling code
- Buttons: 2, for single-gate or dual-gate operation (Button A for "open-stop-close mode", Button B for "pedestrian mode")
- Power Supply: 3V with one CR2032 button type lithium battery
- Operating Temperature: -20°C ~ +50°C
- Function: Remotely controls gate movement.
PEL-1 Electric Latch:
- Application: For locking the gate
- Power Supply: 24Vdc
- Operating Temperature: -20°C ~ +50°C
- Operating Current: 5A
- Dimension: 61mm * 55mm * 120mm
- Function: Locks the gate and must be used with the PS-1 stopper on the master gate.
PS-1 Stopper:
- Function: Used in conjunction with the PEL-1 electric latch to secure the gate.

Usage Features:

The gate openers are suitable for gate leaves ranging from 3.0/4.0/5.0 meters in width and 250/350/500 kg in weight, with an opening angle of up to 120 degrees. The performance can be influenced by factors such as gate dimension, weight, and climate, requiring proper adjustment of the driven torque. The system is designed for ease of installation, with a basic wiring diagram provided. The control box integrates all necessary components for automation, and separate terminals on the control panel allow for connection of various accessories. The radio transmitter offers two modes: "open-stop-close" and "pedestrian mode". The key selector and push button provide alternative methods for gate operation.

Maintenance Features:

Regular maintenance is crucial for the safe and efficient operation of the gate automation system. The manual recommends weekly testing of the system and a professional check and maintenance at least every 6 months by qualified installation personnel. Users are advised to read the installation manual thoroughly before operation and to contact qualified personnel for any unresolved failures. The gear motor can be manually released using special keys for manual gate movement, which is useful during power failures or for maintenance. The flashing light indicates gate movement, providing a visual cue for safety. The photocells detect obstacles, enhancing safety by preventing the gate from closing on obstructions. The design allows for replacement of components like the flashing light bulb set.