Powerware 3110 - Specifications

11
Powerware
®
3110 User's Guide  05147486 B (English) Uncontrolled Copy
C H A P T E R 4
SPECIFICATIONS
Powerware Corporation reserves the right to change specifications
without prior notice.
Table 2. Electrical
120V Model 230V Model
Nominal Voltage 120V 230V
Power Factor 0.67
Voltage Range Online: 90152V
On Battery: 0100V and 152160V
Online: 176272V
On Battery: 0192V and 278290V
Nominal Frequency 50/60 Hz auto-sensing
5763 Hz (60 Hz)
4753 Hz (50 Hz)
Efficiency
(Normal mode)
> 95%
Noise Filtering Full-time EMI/RFI filtering
Overcurrent Protection Resettable circuit breaker
Connections Attached 5-15P power cord IEC 320-C14 input connector
Input fault current: 15A maximum
Power Levels
(rated at nominal
inputs)
PW3110 250: 250 VA, 168W
PW3110 425: 425 VA, 285W
PW3110 600: 600 VA, 400W
PW3110 250i: 250 VA, 168W
PW3110 425i: 425 VA, 285W
PW3110 600i: 600 VA, 400W
Total Output Current 10A maximum
Load Compatibility Switch-mode power supply or resistive load
Output Frequency
(Battery mode)
50/60 Hz ±1 Hz of nominal frequency
Connections (4) 5-15 receptacles with UPS
and surge protection
(2) 5-15 receptacles with surge
protection only
(4) IEC 320-C13 receptacles with UPS
and surge protection
(2) IEC 320-C13 receptacles with surge
protection only