Powerware 9330 - User Manual

www.powerwar e.com
9330
INSTALLATION & OPERATION MANUAL
UPS
10–20 kVA/25–40 kVA

Summary

Safety Considerations

Section I Installation

1.1 Installing the UPS

1.1.5 Inspecting and Unpacking Each Cabinet

2.1 Preliminary Installation Information

Critical preliminary details and warnings before starting UPS installation procedures.

2.2 UPS Cabinet Installation

2.4 Options Cabinet Installation

2.4.2 Joining the Options Cabinet to the UPS Cabinet

2.6 Completing the Installation Checklist

3.1 Important Safety Instructions

Critical safety precautions to be observed when installing and connecting UPS batteries.

Using the Control Panel

9.2 Using the LCD Screen and Pushbuttons

UPS Operating Instructions

10.2 Starting the UPS in Normal Mode

Step-by-step procedure for starting the UPS system in its normal operating state.

10.5 Cold Starting the UPS

10.6 Transfer from Normal to Bypass Mode

Procedure for safely transferring the critical load to bypass mode from normal operation.

10.12 UPS Maintenance Bypass Transfer

10.16 Using the REMOTE EMERGENCY POWER OFF Switch

10.16.1 To Use the REPO Switch

Step-by-step guide for activating the Remote Emergency Power Off switch for safety.

Maintaining the UPS System

14.3 Performing Preventive Maintenance

Guidelines for daily, monthly, and annual preventive maintenance tasks for the UPS.

Powerware 9330 Specifications

General

Topology	Double Conversion Online
Efficiency	Up to 92%
Form Factor	Tower
Input Voltage	220/230/240 VAC
Output Voltage	380/400/415V AC, 3-phase
Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Battery Type	Valve-regulated lead acid (VRLA)
Runtime	Varies based on load
Communication Interface	USB, RS-232
Operating Temperature	0 to 40 °C
Storage Temperature	-15 to 45 °C
Humidity	0 to 95% non-condensing