Need help?Do you have a question about the Powerware 9155 and is the answer not in the manual?
General| Topology | Double conversion online |
|---|---|
| Form Factor | Tower |
| Humidity | 0-95% relative humidity, non-condensing |
| Output Frequency | 50/60 Hz |
| Battery Type | Valve-regulated lead acid (VRLA) |
| Typical Recharge Time | 3 hours to 90% |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Communication Interface | RS-232, USB |
Crucial safety guidelines for installation and maintenance of the UPS.
Warning about lethal voltages and the need for authorized personnel for service.
Alerts about battery energy sources and risks of fire or electric shock.
Advises on battery handling risks, proper disposal, and fire hazards.
Caution for qualified personnel regarding installation and startup risks.
Notes on output voltage, MBM/PDM compatibility, and bypass switch limitations.
Warning for qualified personnel regarding installation and startup risks.
Warning for qualified personnel regarding installation and startup risks.
Warning for qualified personnel regarding installation and startup risks.
Overview of available serial communication devices and capabilities.
Details on various X-Slot cards for networking and monitoring.
Procedures for different UPS startup modes, including maintenance bypass.
Steps to start the UPS in maintenance bypass mode.
Steps to start the UPS in bypass mode without an MBM/PDM.
Procedure for starting the UPS in normal operating mode.
How to start the UPS using battery power without utility input.
Procedure for safely shutting down the UPS.
Electrical and performance specifications of the UPS.
Common UPS alarms, their possible causes, and recommended actions.
To Next Page
