Powerware 9155 - Wall-Mounted Bypass Wiring

Wall-Mounted Bypass Switch Installation
41
Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com
Wiring the Wall-Mounted Bypass Switch
The Powerware 9155 UPS has the following power connections:
쑺 2-phase (L1 and L2), neutral, and ground connection for
rectifier/bypass input
쑺 2-phase (L1 and L2), neutral, and ground connection for load output
The nominal input/output voltages are:
쑺 100/200, 110/220, or 120/240 Vac with 180° phase displacement
쑺 120/208 or 127/220 Vac with 120° phase displacement
Output overcurrent protection and disconnect switch must be provided
by others.
Figure 28 on p age 47 shows a oneline diagram of the UPS with a
wall-mounted bypass switch.