Need help?Do you have a question about the Powerware 9170 and is the answer not in the manual?
Important safety precautions to follow before installing the UPS.
Required circuit breaker ratings for hardwired installations and line cord determination.
Explanation of Make-Before-Break (MBB) and Break-Before-Make (BBM) bypass switch types.
Steps for mounting and wiring an external bypass switch for UPS installation.
Required circuit breaker ratings for hardwired installations and line cord determination.
Steps for performing the electrical installation of the UPS without a bypass switch.
Requirements for making the neutral-to-ground connection in isolated-output systems.
Procedure for installing power and battery modules into the UPS cabinet.
Procedure for setting initial UPS operating parameters like password, language, and time.
Procedure for easily replacing battery modules without disconnecting the load.
Procedure for easily replacing power modules without disconnecting the load.
Quick answers to common questions about UPS operation and setup.
How alarms are annunciated and displayed on the UPS front panel.
Descriptions and actions for critical alarm messages requiring immediate attention.
Contact information and procedures for obtaining UPS technical support and service.
General| Topology | Double Conversion Online |
|---|---|
| Frequency | 50/60 Hz |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Form Factor | Tower |
| Input Frequency | 50/60 Hz |
| Typical Recharge Time | 3-8 hours |
| Operating Temperature | 0°C to 40°C |
| Output Waveform | Pure Sine Wave |
| Output Frequency | 50/60 Hz |
To Next Page
