9
Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com
Chapter 3 UPS Setup
This chapter describes:
쑺 Equipment inspection
쑺 Floor loading
쑺 Unloading the cabinet(s)
쑺 Selecting an installation option
The instructions are intended for the chief operator/system supervisor,
electrical consultants, and installation electricians. Local regulations and
electrical code must be followed during the UPS installation.
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping
and packing materials for the carrier or place of purchase and file a
claim for shipping damage. If you discover damage after acceptance, file
aclaimforconcealeddamage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
NOTE Check the battery recharge date on the packaging label. If the
date has expired and the batteries were never recharged, do not use the
UPS. Contact your service representative.
To Next Page
Loading...
