Need help?Do you have a question about the Powerware Prestige 6000 and is the answer not in the manual?
General| Output Frequency | 50/60 Hz |
|---|---|
| Power Rating | 6000 VA |
| Topology | Double Conversion Online |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | RS-232, USB |
| Form Factor | Tower |
Discusses considerations for safeguarding equipment by selecting the correct UPS model and battery configuration.
Explains how to determine power consumption needs by calculating load requirements in volt-amperes (VA).
Guides through calculating battery runtime based on load requirements and battery cabinet configuration.
Explains common symbols and their meanings found on the UPS front panel and elsewhere.
General instructions for safe installation, operation, and maintenance of the UPS.
Warns about lethal voltages within the UPS and stresses that only authorized personnel should perform service.
Details the risks associated with UPS batteries, including electrical shock and fire hazards.
Instructions for handling, storing the UPS, and installing the PowerPass Distribution Module (PPDM).
Details rear panel connections for various PPDM models and output neutral ground configuration.
Covers requirements and connection details for installing a Remote Emergency Power-Off (REPO) switch.
Overview of front panel functions, indicators, and operational modes (Normal, Bypass, Battery).
Explains diagnostic tests, battery testing, battery start feature, and initial UPS startup.
Procedures for shutting down the UPS, changing output voltage, and monitoring UPS status.
How to use the PPDM for power delivery and procedures for disconnecting and reconnecting the UPS.
Describes the UPS serial port, its uses, and notes on proper cable usage.
Guides for accessing and configuring communication settings via the front panel and serial menu.
Defines serial port contacts for various communication modes like Novell, 3Com, and AS/400.
General and PPDM-specific operational ratings for the Prestige 6000 UPS.
Details dimensions, voltage, frequency, approvals, and electrical performance parameters.
Lists part numbers for UPS components, accessories, and information on ordering manuals.
A chart for diagnosing common UPS issues and understanding alarm conditions.
Procedures for resetting the UPS after an alarm and silencing active alarms.
Introduction to service and support for AS/400 and S/390 UPS models.
Covers UPS and battery warranties, and the Powerware Protection Guarantee terms.
How to obtain service, information required, and customer roles in the exchange process.
Guidelines for planning UPS installation in S/390 environments, including cable access and placement.
To Next Page
