Powerware 9330 - Unit Shutdown Screen

9-- 22
Powerware 9330 (10 kVA--40 kVA) Installation and Operation
164201300 Rev . N 013004
9.5 Unit Shutdown Screen
The Unit Shutdown screen appears when the LOAD OFF pushbutton is pressed.
This screen allows the LOAD OFF process to be aborted if the LOAD OFF
pushbutton was pressed accidentally. Figure 9---28 shows the Unit Shutdown
screen. For detailed information about using the L OAD OFF and Shutdown screen,
refer to Chapter 10, “UPS Operating Instructions”.
UNIT SHUTDOWN
YES NO
THIS WILL REMOVE POWER TO THE LOAD!
ARE YOU SURE?
HOLD YES FOR 2 SECONDS TO POWER DOWN
Figure 9 ---28. Shutdown Screen