8-- 9
Powerware 9330 (10 kVA--40 kVA) Installation and Operation
164201300 Rev . N 013004
8.6 Symbols, Controls, and Indicators
These symbols may appear on your UPS system or on labels inside the UPS. They
are accepted by most international safety agents. Everyone in your organization
who works with your system should understand the meaning of these symbols:
ON
The principal power switch is in the “On” position.
OFF
The principal power switch is in the “Off” position.
PHASE
The word “phase.”
CAUTION: REFER TO MANUAL
Stop and refer to the Operator’s Manual for more information.
RISK OF ELECTRIC SHOCK
There is a risk of electric shock present, and you should observe associated
warnings. The UPS contains high voltages.
To Next Page
Loading...
