4. Before Connection
A. Safety Precautions for Battery Connection:
1. Always wear insulating gloves before making any connections.
2. Avoid reversing the battery's polarity or creating short circuits
when connecting the positive and negative terminals.
2.For systems with multiple batteries, consider performing
voltage equalization every 6 months to address potential
voltage differences that may occur after five months of use.
This helps maintain consistent voltage levels between battery
packs and ensures optimal performance in series and parallel
setups.
B. Balancing Voltage in Parallel Battery Connections:
1. When connecting batteries in parallel, ensure the voltages are equal.
5. Equalization steps
1. Charge each battery individually to its full capacity.
2. Connect the batteries one at a time in parallel and allow them
to sit together for 12-24 hours, but no more than 4 groups.
3. The battery pack can be connected in both series and
parallel configurations.
When using batteries in series and/or parallel modes, please
ensure that the following conditions are met:
a. Use batteries with the same battery capacity (Ah) and BMS (A).
b. Choose batteries from the same brand (different brands of
lithium batteries may have unique BMS requirements).
c. Purchase batteries from nearby sources (within 1 month).
Restrictions
To Next Page
