PowMr Keeper Series User Manual

4
4 DESCRlPTlON
4.1 Buttons
Mode
Remarks
load switch
When the load is manual mode, by short pressing set button can switch
the load.
Breakdown
Pressing the set button shortly
Browse mode
Pressing the menu or set button shortly
Setting mode
Long press menu button enter the secondary browsing interface and
then press menu or set button to browse interface, long press menu
again to enter the setting mode, short press menu or set button to set
parameters then long press menu button to save the setting. Long press
set button or 20s without keystroke operation will exit secondary
browsing interface (parameter not saved)
4.2 LCD
1. The default night display of controller:
When the solar panel input voltage have been detected by controller less than sensor identification
point voltage, this graphic symbol will be light.
2. The default daytime display of controller:
When the solar panel input voltage have been detected by controller more than sensor identification
point voltage, this graphic symbol will be light.
3. The indicator of PV array parameter:
When the solar panels data was displaying, this graphic symbol will be light, for example the
voltage of solar panel.

PowMr Keeper Series Specifications

General

Brand	PowMr
Model	Keeper Series
Category	Controller
Language	English