Need help?Do you have a question about the PowMr Keeper1230 and is the answer not in the manual?
Connection points for the solar panel array input.
Connection points for the battery.
Connection points for the load output.
Allows selection of the system's operating voltage (12V/24V).
Procedure for setting the voltage to disconnect the load due to low battery.
Details protection against low battery voltage and its recovery.
Details protection against over battery voltage and its recovery.
General| Model | Keeper1230 |
|---|---|
| System Voltage | 12V/24V Auto |
| Rated Charge Current | 30A |
| Rated Load Current | 20A |
| Max PV Input Power | 390W |
| Max. Charging Conversion Efficiency | 98% |
| Operating Temperature | -20°C to +55°C |
| Humidity | ≤95% (N.C.) |
| Rated Battery Voltage | 12V/24V |
| Max. PV Input Voltage | 50V |
| Max PV Input Voltage | 50V |
| Max. PV Input Power | 390W (12V) / 780W (24V) |
| Protections | Overcharge, Over-discharge, Overload, Short Circuit |
To Next Page
