EasyManua.ls Logo

Powrmatic TE Series User Manual

Powrmatic TE Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and Servicing
Instructions
WARNING: THIS APPLIANCE MUST BE EARTHED
CE
£2.50 When supplied separately.
TE Range Issue 3 March 2000
The TE Range
Question and Answer IconNeed help?

Do you have a question about the Powrmatic TE Series and is the answer not in the manual?

Powrmatic TE Series Specifications

General IconGeneral
BrandPowrmatic
ModelTE Series
CategoryGas Heater
LanguageEnglish

Summary

Introduction

Gas Safety Regulations

Legal requirement for qualified persons to install, adjust, and convert gas appliances.

Technical Data

Dimensions

Provides dimensional data (A-G) for TE41 and TE61 models in SI units.

Specifications and Electrical Data

Refers to enclosed specification sheet for data specific to the supplied heater.

General Requirements

Related Documents

Lists relevant documents including British Gas and British Standards for installations.

Location

Specifies suitable location criteria for the air heater, including clearances and ambient temperature.

Gas Supply

Details requirements for gas supply, including service pipes, meters, and installation pipes.

Flue System

Covers flue system requirements, materials, condensation prevention, and termination.

Air Supply

Specifies air supply requirements and vent grille free area calculations for specific conditions.

Air Distribution System

Details avoiding air throw obstruction and ensuring a clear return air path.

Installation of Air Heater(s)

Electrical Supply

Details electrical supply requirements, wiring, and isolation for the air heater.

General Installation

Covers compatibility checks, installation rules, and minimum clearances for heaters.

Flue System

Specifies flue system requirements, including Tee piece, height, bends, and resistance limits.

Condensate Drainage

Provides guidance on minimizing condensation in the flue and managing its drainage.

Gas Connection

Details gas connection requirements, including servicing valve and solid pipework.

Electrical Connections

Explains final electrical connections, isolation points, and cable requirements.

Control Thermostat Siting

Commissioning & Testing

Electrical Installation

Ensures electrical safety checks are performed by a qualified person.

Gas Installation

Covers inspection, testing for soundness, and purging of the gas installation.

Fan Rotation

Guides on checking and correcting fan rotation direction.

Lighting the Air Heater

Details steps for gas controls assembly, sequence check, and final adjustment.

Final Soundness Test

Instructs on performing a final soundness test on gas controls using leak detection fluid.

Control Settings

Specifies settings for Eurotrol OSII mode and modulating control temperature.

Servicing

General Servicing

Emphasizes annual full maintenance and re-commissioning after work.

Burner Maintenance

Refers to the burner supplement for detailed burner maintenance procedures.

Heat Exchanger Cleaning

Fan Assembly

Replacement of Faulty Components

Burner Components

Refers to the burner supplement for replacement of burner components.

Gas Controls Assembly

Refers to the burner supplement for replacement of gas controls assembly.

Main Fan Motors

Details replacing main fan motors, including belt tension adjustment.

Main Air Fan(s)

Provides instructions for replacing one or both main air fans.

Fan and Limit Thermostats

Details replacing fan/limit thermostats (White Rodgers 5F464) and their settings.

Fault Finding

Short List of Parts

Related product manuals