To Next PageTo Next Page
Need help?Do you have a question about the Powrmatic CP series and is the answer not in the manual?
General| Category | Gas Heater |
|---|---|
| Model | CP Series |
| Remote Control | Optional |
| Fuel Type | Natural Gas / Propane |
| Thermostat | Optional |
| Dimensions | Varies by model |
| Weight | Varies by model |
Pre-operation checks for safe and correct lighting procedures.
Step-by-step instructions for initiating gas and oil fired air heater operation.
Procedures for safely turning off the air heater for short or long periods.
Explanation of heater functions, including summer/winter modes and fan control.
Details on operation and reset procedures for fan and limit thermostats.
Recommendations for regular servicing to ensure efficient and reliable operation.
Regulations, documents, and standards for gas-fired heater installation.
Regulations, documents, and standards for oil-fired heater installation.
Initial checks for fuel specification, local conditions, and appliance compatibility.
Guidelines for selecting an installation site, considering flue, air supply, and clearances.
Instructions for mounting the heater, including vibration isolation and surface requirements.
Requirements for providing adequate combustion air and ventilation for the heater.
Guidance on flue system installation, including pipework, height, bends, and termination.
Procedures for connecting gas or oil supply to the heater, including safety measures.
Instructions for safe electrical wiring and connection according to regulations.
Considerations for ductwork, air throw, return air paths, and fire safety.
Recommendations for optimal placement of room thermostats for accurate temperature control.
Safety checks for the electrical installation by a competent person.
Procedures for inspecting, testing, and purging gas installations according to standards.
Checking the air distribution system for correct setup and adequate airflow.
Step-by-step guide for commissioning gas-fired heaters, including checks and adjustments.
Procedures for initial startup, adjustment, and final checks of oil-fired heaters.
Instructions for transferring the heater and documentation to the end user.
Requirements for annual maintenance and post-service commissioning.
Guidance on servicing the burner unit according to manufacturer instructions.
Steps for cleaning the heat exchanger, including baffle removal and tube brushing.
Procedures for inspecting, cleaning, and replacing fan blades and assembly.
Instructions for accessing, cleaning, or replacing the oil filter.
Guidance on replacing faulty parts like burner components, gas controls, fans, and thermostats.
Methodology for calculating the pressure resistance of the flue system.
