3. Operation
UP! mini 3D Printer User Manual 24
(Windows version)
(Mac version)
Figure 3-19 Initializing a printer
TIP: Under the condition that your printer is not responding properly, the
first thing to try is to re-initialize the printer by clicking the ‘Initialize’
option in the ‘3D Print’ menu.
3.3.2 Preparing Platform
Before printing, print platform must be prepared, so that the model can adhere
to the platform, and does not move during the printing process. The cell board
that come with the machine is a thin, rigid sheet with holes pre-drilled at
standard intervals across. When printing starts, for the first layer, molten plastic
will be pushed into the holes along the print path, and this provides a strong
To Next Page
Loading...