PPS25 Electronic Memory Gauge
User Manual
Pioneer Petrotech Services Inc.
infopps@pioneerps.com
1-888-PP-GAUGE (774-2843)
www.pioneerps.com
4.3 Inspecting Gauges
PPS SmartView software can be used to test the gauges before a filed operation.
Please refer to “PPS SmartView User Manual” for more detail.
Procedure:
(1) Complete a bench test by plugging in a battery pack for 10mins;
(2) Connect a PPS USB download interface to the gauge (Fig. 1) and a computer to download
data and check if the record data is normal;
(3) Run SmartView and use “Diagnostics” in Options Tab to test the gauge (Fig. 2).
Click “Start” Button
Fig. 2
To ensure gauges are functional, a regular inspection (Bench Test) is
necessary before each operation.
Your gauges may have a different receptacle (4pin or 6pin), please make sure
you are using a proper plug on the USB interface for connection.
The pressure and temperature reading should be reasonable at atmospheric
pressure and ambient temperature.
To Next Page
Loading...