PR electronics 3000 - Page 16

14 3000V101-UK
Response time
Selectable
HART®
read only mode
HART®
mode
< 30 ms < 300 ms < 60 ms 0.06...60 s
3101
 
3102
 
3111
 
3112
 
3113
 
3331
 
3333
 
3337
 
Accuracy - the greater of the basic and general value is valid
Device Input
Basic
accuracy
General
accuracy
Temperature
coefficient
3112, 3113,
3331, 3337
Pt100 ≤ 0.1°C
≤ ± 0.05%
of span
0.02°C/°C (basic) or
≤ ± 0.01% of span / °C
3111, 3113,
3331, 3337
TC ≤ 0.5°C
0.1°C/°C (basic) or
≤ ± 0.01% of span / °C
3102, 3333 Pt100 ≤ 0.2°C
≤ ± 0.1% of
span
0.02°C/°C (basic) or
≤ ± 0.01% of span / °C
3101 TC ≤ 1°C
0.1°C/°C (basic) or
≤ ± 0.01% of span / °C
Incorrect DIP-sw setting identification:
Supplied .......................................................................  0V/0mAoutput;LED0.5s/1Hz
Loop-powered ........................................................... 3.5 mA output
EMC immunity influence ....................................... < ±0.5% of span
Extended EMC immunity:
NAMUR NE 21 ........................................................... < ±1% of span