9202QF01
LERBAKKEN 10, 8410 RØNDE DENMAR
Revision date:
2019-04-04
Version Revision
V5 R0
Prepared by:
PB
Page:
3/3
The module must be installed in an enclosure suitable for the environment for which it is used.
The module is galvanically isolated and does not require grounding.
Use 60 / 75 ºC copper conductors with wire size AWG: (26-14).
Warning: Substitution of components may impair intrinsic safety and / or suitability for Div. 2 / Zone 2.
Warning: To prevent ignition of explosive atmospheres, disconnect power before servicing and do not
separate connectors when energized and an explosive gas mixture is present.
Warning: Do not mount or remove modules from the Power Rail when an explosive gas mixture is
present.
9202 - Product version 9202-003 29
To Next Page
Loading...
