Need help?Do you have a question about the PR 5909 and is the answer not in the manual?
General| Brand | PR |
|---|---|
| Model | 5909 |
| Category | USB Interfaces |
| Language | English |
Covers general safety, hazardous voltages, and installation voltage considerations.
Explains hazard, CE, and double insulation symbols found on the device.
Defines terms like hazardous voltages and specifies environmental operating conditions.
Provides guidelines for device mounting, programming, and normal operation.
Details cleaning the device with a moistened cloth.
States disclaimer if manual instructions are not strictly followed.
Declares conformity with EMC and Low Voltage directives and relevant standards.
Describes the USB interface for configuration and monitoring of PR electronics devices.
Details the PC program CD PReset, its version, and necessary USB drivers.
Lists memory, display resolution, and hard disk space for supported Windows OS.
Steps for installing the PReset program before connecting the USB interface.
Details on handling driver search prompts and specifying the CD-ROM path.
A sequential guide for connecting the device and installing USB drivers.
Instructions for responding to 'Found New Hardware Wizard' and 'Windows Logo testing' prompts.
Steps to cancel the 'Found New Hardware Wizard' prompts for Vista installation.
Procedure to open Device Manager and initiate driver software update for unknown devices.
Steps to browse for driver files on the CD-ROM drive.
Clicking 'Close' after successful driver software update.
Requirement for local administrator privileges to install PReset on Windows 7.
Instructions for installing PReset from CD or website and following on-screen prompts.
Requirement for local administrator privileges to install 5909 on Windows 7.
Guide to access Device Manager via Control Panel and update driver software.
Selecting the option to browse the computer for driver software.
Browsing to the 'Drivers' folder on the CD-ROM drive for driver files.
Visual indicator showing the progress of the 5909 driver installation.
Clicking 'Close' upon successful completion of the driver software update.
Confirmation of the 5909 driver installation completion in Device Manager.
Launching the PReset software and proceeding to identify the connected 5909 device.
Selecting the COM port for USB communication within the PReset program.
Procedure to link the USB port to a COM port for Loop Link communication.
Diagram illustrating connection of PR devices using EZ-Mini-Hooks and Loop Link.
Diagram showing connection of PR devices via a modular connector and Loop Link.
Description of programmable displays and interfaces for analogue/digital signals in Ex zones.
Information on galvanic isolators and transmitters for DIN mounting.
Details on PC or front programmable modules with universal input/output options.
List of international websites and sales contact details for PR electronics.
Contact information and certifications for the Denmark head office of PR electronics.
To Next Page