EasyManua.ls Logo

prana 200C - Preheating Element and Passive Mode; Defrosting Procedure

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
In mode «AUTO» after engine shutdown, «Winter modwill work for 30 minutes to prevent
icing in the system, which may result in reduced ef ciency or condensate drainage
complications.
Preheating element (additional option)
Recuperators that will be used in rooms with excessive humidity in the cold climate are
recommended to be equipped with an additional heating element.
Passive mode
The operating mode of the ventilation system with the open lid of the recuperator and
switched off motors. It lies in the movement of uncontrolled air ows through the recuperator
due to the difference in pressure and temperature inside and outside the premises. It is
allowed to use, when the difference between outside and inside temperatures is no more
than 5 o C.
Defrosting
WARNING! In the cold season, the imper operation of the recuperator is likely to freeze it!
When freezing, it is necessary to activate function «mini-heating up» with engine switched
off for at least 60 minutes, and let it unfreeze, then turn on the recuperator to the required
mode.
turned off motors
+
the “Mini heating up”
turned on
turn on
the desired mode
1.
2.
2.
9
turned off motors
turned off motors
Fig. 2. Defrosting

Related product manuals