Model No. TT-3500
Page4of7
Feb 2010
SAFETY DEVICES
Safety Device
To comply with CE safety regulations there are two steps to turn on the induction unit.
First step: Push power ON/OFF key.
Second step: Within 5 seconds, turn power regulating knob OR push temperature select key "+", "-".
Automatic Safety Shut-Off,
If the induction unit is left on for more than 60 seconds without a pan or with an incompatible pan, the unit will
automatically shut off.
Material Compatibility Detector
If the pan’s material or it’s dimensions are not suitable for the induction unit, the power indicator light will not
light.
Small Object Detector
The induction unit will not recognize any objects or utensils smaller than 5cm in diameter. For best results,
use pans that are between 12cm and 26cm in diameter.
Overheating Protection Device,
If the temperature of the pan reaches 250
o
C, and the temperature remains for 60 seconds, the unit will shut
off automatically, there will be a short warning sound.
IC Automatic Reset Device
Main control micro processor equipped with watch "Dog Device", the IC will automatically reset when the
software programme malfunctions.
SUITABLE POTS & PANS
1. Iron
2. Cast iron
3. Stainless steel
4. Enamelware
All pots and pans must have a magnetic bottom.
All pots and pans must have a flat bottom.
All pots and pans should have a diameter between 12 and 26 cm
UNSUITABLE POTS & PANS
1. Pot with diameter below 5 cm.
2. Stainless steel pans with aluminum bottom
3. Pottery
4. Glass pans
5. Aluminum pans
6. Bronze pans
7. Copper pots
8. Pans with feet
To Next Page
Loading...