EasyManua.ls Logo

PRECISION DIGITAL PD765-6R0-00 - User Manual

PRECISION DIGITAL PD765-6R0-00
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PRECISION DIGITAL CORPORATION
89 October Hill Road • Holliston MA 01746 USA
Tel (800) 343-1001 • Fax (508) 655-8990
www.predig.com
TRIDENT & TRIDENT X2
MODEL PD765
Instruction Manual
Accepts Current, Voltage, TC, & RTD Inputs
4 Digit Display, 0.56" (14 mm) or 1.20" (31 mm)
Linear or Square Root with Low-Flow Cutoff
Maximum/Minimum Display
Type 4X, NEMA 4X, IP65 Front
Universal Power Supply 85-265 VAC
12-36 VDC/12-24 VAC Power Option
Two Relays and 4-20 mA Output Option
24 VDC Transmitter Power Supply Options
USB, RS-232, & RS-485
Serial Communication Adapters Options
Free Modbus
®
RTU Protocol
Copy Meter Settings to Other Meters
Free MeterView
®
Software - Configuration & Data Acquisition

Table of Contents

Questions and Answers

  • A
    Alisha MedinaAug 2, 2025
    What to do if PRECISION DIGITAL PD765-6R0-00 display error message during calibration (err)?
    • J
      joseph64Aug 2, 2025
      If your meter shows an error message 'err' during calibration, check the following: 1. Signal connections. 2. Input selected in the Setup menu. 3. Minimum input span requirements.
  • J
    Julie BrooksAug 10, 2025
    Why is PRECISION DIGITAL PD765-6R0-00 displaying '? open ? 9999 ? -1999 ?' and not responding to RTD?
    • E
      Eric NicholsonAug 10, 2025
      If your meter displays '? open ? 9999 ? -1999 ?' or a negative number and isn't responding to RTD, verify: 1. Input selected in the Setup menu. 2. TC/RTD Switch position. 3. Corresponding signal at the Signal connector.
  • R
    Ricky KellyAug 17, 2025
    What to do if PRECISION DIGITAL PD765-6R0-00 display alternates between 'Hi and a number' and 'Lo and a number'?
    • N
      nathaniel55Aug 18, 2025
      If the display alternates between 'Hi and a number' and 'Lo and a number', press the Menu button to exit Max/Min display readings.
  • K
    Kathleen SchultzAug 26, 2025
    How to fix PRECISION DIGITAL Measuring Instruments with no display?
    • G
      gainesjohnAug 26, 2025
      Check the power at the power connector.

Summary

Introduction and Ordering

Product Overview and Features

Provides an overview of the Trident meter, its capabilities, and key features.

Ordering Information

Details model ordering codes, options, and available accessories.

Specifications and Compliance

Technical Specifications

Covers general, input/output signal, environmental, physical, and product option specifications.

Compliance and Safety

Outlines UL listing, EMC standards, and crucial safety warnings.

Installation and Setup

Panel Mounting and Connections

Guides through panel mounting, connector labeling, and wiring for power, signals, and outputs.

Programming and Configuration

Covers PC and front panel programming, menu navigation, and setting parameters.

Operation and Features

Relay, Alarm, and Output Operations

Illustrates relay behavior, alarm logic, time delays, and analog output scaling.

Advanced Features and Calibration

Covers offset adjustment, noise filter, serial communications, meter copy, and calibration procedures.

Troubleshooting and Support

Troubleshooting Guide

Provides diagnostics, common issues, and solutions for meter problems.

Contact Information

Lists contact details for technical support, sales, and accessing the latest manual.

PRECISION DIGITAL PD765-6R0-00 Specifications

General IconGeneral
Display TypeLED
Display ColorRed
Input TypeRTD
MountingPanel mount
RTD Range-200 to 850°C
Accuracy±0.1% of span ±1°C
RTD Type2, 3, or 4 wire
Resolution0.1°C
Power Supply85-265 VAC
Dimensions48 x 96 mm
Housing MaterialPlastic
Protection RatingIP65

Related product manuals