PRECISION DIGITAL PD603 User Manual

Sabre P ● Model PD603
Process Meter
Instruction Manual
• 0-20, 4-20 mA, 0-5, 1-5, 0-10, ±10 V Inputs
• Type 4X, NEMA 4X, IP65 Front
• Shallow Depth Case 3.6" Behind Panel
• 4 Digit Display, 0.56" (14 mm) High, Red LEDs
• Easy Front Panel Programming
• Scale without a Signal Source
• Calibrate with a Signal Source
• Maximum/Minimum Display
• Universal Power Supply 85-265 VAC
• 12-36 VDC/12-24 VAC Power Option
• 24 VDC @ 200 mA Transmitter Supply Option
PRECISION DIGITAL CORPORATION
19 Strathmore Road • Natick MA 01760 USA
Tel (800) 343-1001 • Fax (508) 655-8990
www.predig.com

PRECISION DIGITAL PD603 Specifications

General

Brand	PRECISION DIGITAL
Model	PD603
Category	Measuring Instruments
Language	English

Summary

MOUNTING DIMENSIONS

TROUBLESHOOTING

SPECIFICATIONS

COMPLIANCE INFORMATION

SAFETY INFORMATION

INSTALLATION

Connections

Explains how to make electrical connections to the meter.

Signal Connections

Details how to connect input signals to the meter.

SETUP AND PROGRAMMING

Front Panel Buttons and Status LED Indicators

Main Menu

Setting Numeric Values

Details how to adjust numeric values using the front panel buttons.

Setting Up the Meter (SEtu)

Guides on setting the input signal type and decimal point position.

Setting the Input Signal (InPt)

Explains how to select the input signal (current or voltage).

Setting the Decimal Point (dEc.P)

Programming the Meter (ProG)

Introduces menus for calibration and scaling the meter.

Scale

Explains how to scale process inputs to display engineering units.

Scaling the Meter (SCAL)

Provides a step-by-step guide on how to scale the meter.

Calibrating the Meter (CAL)

Guides on calibrating the meter to display process in engineering units.

Setting Up the Password (PASS)

OPERATION

Front Panel Buttons Operation

Maximum/Minimum Readings