Sabre P ā Model PD603 Process Meter Instruction Manual
Calibrating the Meter (Cal)
To scale the meter without a signal
source refer to Scaling the Meter
(ScAL), page 22.
The meter can be calibrated to display the process in engineering units
by applying the appropriate input signal and following the calibration
procedure.
The use of a calibrated signal source is strongly recommended to cali-
brate the meter.
inp1 dis1 04.00
Set Display 1
Value
inp2
Calibrate
Input 2
Cal
Display
Flashes
Accepting
Input
See Scaling the Meter for Button
Functions Description
24
To Next Page
Loading...
