Precision matthews PM 728V-T

1
PM 728V-T v2 2020-10 Copyright © 2020 Quality Machine Tools, LLC
Model PM 728V-T Precision Milling Machine
Square column design, heavy cast iron construction
High weight-to-size factor: 370 lb excluding stand
1 HP (750W) brushless dc motor, 110 Vac single phase power
Quiet belt drive, no gears
Variable spindle speed from 100 to 4000 + rpm
Table size 7" x 28"
One-shot lubrication system standard
Quill DRO for precise downfeed measurement
PM-728V-T with optional stand

Precision matthews PM 728V-T Specifications

General

Brand	Precision matthews
Model	PM 728V-T
Category	Power Tool
Language	English

Summary

PM-728 V-T FAQ

Troubleshooting Mill Operation Issues

Section 1 INSTALLATION

Initial Setup and Unpacking

Procedures for setting up and moving the milling machine.

Drawbar Removal Procedure

Uncrating and Mill Movement

Safely moving the milling machine from its packaging.

Assembly and Initial Checks

Pre-Operation System Checks

Verifying all systems are ready before powering on.

Everyday Safety Precautions

Section 3 USING THE MILL

Headstock and Spindle Controls

Tooling Installation and Handling

Procedures for installing and removing tooling.

Headstock Tramming Procedure

Section 4 MAINTENANCE

Lubrication and Oiling Procedures

Recommended lubricants and general oiling guidelines.

Gib and Leadscrew Adjustments