To Next PageTo Next Page
Need help?Do you have a question about the Precision matthews PM-833TV and is the answer not in the manual?
General| Brand | Precision matthews |
|---|---|
| Model | PM-833TV |
| Category | Power Tool |
| Language | English |
Addresses issues with R8 collets not fitting into the spindle.
Explains why the drawbar cap might not seat properly.
Troubleshoots motor not running when the switch is on.
Provides an overview of the PM-833TV milling machine's design.
Details the technical specifications of the PM-833TV mill.
Highlights critical points to observe during installation.
Specific safety notes before adjusting headstock elevation.
Instructions for safely removing the mill from its shipping containers.
Guidance on securely mounting the milling machine.
Procedures for moving the mill using slings.
Methods for moving the mill using its lifting eyes.
Steps for securing the mill headstock to its stand.
Completing the assembly and cleaning the machine.
Overview of available power feed motors for axes.
Steps for connecting and powering up the machine.
Testing the X-axis power assist functionality.
Testing the Z-axis power assist functionality.
Steps for performing an initial test run of the machine.
Essential safety guidelines for daily machine operation.
Procedures for inserting and removing collets, arbors, etc.
How to control the quill's vertical movement.
Adjusting the vertical position of the headstock.
Operating the optional Z-axis power feed.
Methods for accurately setting headstock elevation.
How to move the machine table along X and Y axes.
Information on the optional X-axis power feed.
Using dial indicators for precise axis positioning.
Adjusting the headstock tilt angle for specific operations.
Process for ensuring accurate 90-degree alignment of the headstock.
How to mount and align a vise on the machine table.
Using vise keys for quick and accurate vise placement.
Specifies oils and greases for machine lubrication.
Routine oiling procedures for machine longevity.
Cleaning and lubricating the quill's rack and pinion.
Adjusting gibs for proper table movement and accuracy.
Adjusting or replacing the quill's return spring.
Information on the R8 collet locating set screw.
How to adjust the R8 collet locating screw.
Step-by-step guide to remove the quill assembly.
Maintenance and servicing of spindle bearings.
Instructions for shortening or modifying the drawbar.
Procedure for replacing the spindle drive belt.
Overview of available power feed motor options.
Step-by-step guide for installing the X-axis power feed.
Step-by-step guide for installing the Z-axis power feed.
Installing limit switches for the feed stops.
Exploded view and parts list for table, column, and base.
Exploded view and parts list for the headstock assembly.
