Precision matthews PM-833TV

To Next Page

To Previous Page

This manual contains essential safety advice on the proper setup, operation, maintenance, and service

of the PM-833TV mill. Failure to read, understand and follow the manual may result in property damage

or serious personal injury.

There are many alternative ways to install and use a milling machine. As the owner of the machine you

are solely responsible for its proper installation and safe use. Consider the material contained in this man-

ual to be advisory only. Quality Machine Tools, LLC cannot be held liable for injury or property damage

during installation or use, or from negligence, improper training, machine modications or misuse.

This manual describes PM-833TV machines as shipped from early 2020. There may be detail di󰀨erences between your specic ma-

chine and the information given here (with little or no impact on functionality). Please email us if you have questions about any aspect

of the manual or your machine (see our website www.precisionmatthews.com for support addresses). Your feedback is welcomed!

Section 1 FEATURES & SPECIFICATIONS

MODEL PM-833TV MILLING MACHINE

General information

The PM-833TV is a top-quality “dovetail column” mill designed for regular use in demanding industrial applications. A Variable

Frequency Drive (VFD) provides innitely variable spindle speeds from 50 to 3200 rpm. The spindle runs in high-quality ta-

pered-roller bearings in a precision-ground quill with coarse and ne downfeed options. Unlike most other bench-style mills, the

PM-833TV comes with a one-shot lubrication system, a great time saver in situations where continuous duty is a requirement.

All sliding surfaces are hand-scraped for precise t, good oil retention and ultra-smooth operation.

Variable-speed motor options are available to power the table (X-axis), and to raise/lower the headstock (Z-axis).

PM-833TV oor plan

This material was originated by Precision Matthews. No portion

of the manual may be reproduced or distributed in any form

without the written approval of Quality Machine Tools, LLC.

Related product manuals