Need help?Do you have a question about the Precision Power ATOM A400.4D and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| RMS Power @ 4 Ohms | 100W x 4 |
| RMS Power @ 2 Ohms | 150W x 4 |
| RMS Power @ 4 Ohms Bridged | 300W x 2 |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >90dB |
| Input Sensitivity | 200mV - 6V |
| Crossover Type | Variable High-Pass/Low-Pass |
| Crossover Frequency | 50Hz - 500Hz |
| Bass Boost | 0dB - 12dB @ 45Hz |
| Damping Factor | >150 |
To Next Page
