Precor EFX 883 - Required Tools

20 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 813
Center cross bar cap
Outer handrail cap (2)
Inner handrail cap (2)
Upright support covers (right-hand and left-hand sets)
Required Tools
 #2 Phillips screwdriver
 Rubber mallet
 SAE standard hex wrench set
 SAE standard socket set
 Two ⁹₁₆-inch wrenches (open-end and box-end)
 Wire cutter