Precor EFX556i Owner's Manual Addendum

E
F
G
D
C
A
B
H
K
L
M
Owner’s Manual
Addendum
This addendum accompanies your EFX
®
556i Owner’s Manual . Changes have
occurred to the hardware kit and the Assembly Instructions.
HARDWARE KIT
The following hardware kit replaces the one found in the Owner’s Manual .
❑ (A) four stainless steel socket hex screws—upper column assembly
❑ (B) fourteen washers—upper column assembly
❑ (C) four nuts—upper column assembly
❑ (D) six black socket hex screws—handlebars
❑ (E) two 2-inch hex screws—link arm assembly
❑ (F) six washers—link arm assembly
❑ (G) two steel bushings—link arm assembly
❑ (H) two low profile locknuts—link arm assembly
❑ (J) four plastic caps—link arm assembly
❑ (K) four buttonhead hex screws—covers for upright assembly
❑ (L) ⁵⁄₁₆ - inch hex key—screws on bracket covers
❑ (M) ¹⁄₄ - inch hex key— upper column assembly
P/N 47934-101
June 17, 2004
If any items are missing, refer to Obtaining Service in your Owner’s Manual .
Diagram 1
EFX
®
556i Hardware kit
(not shown to scale).
EFX556i
J

Precor EFX556i Specifications

Performance

crossramp	25 degrees (fixed)
stride length	18 inches (46 cm)
resistance levels	1 - 20

Regulatory and Frame

frame	Powder-coated steel
regulatory approval	FCC, ETL, CE
power	Self

Weight and Dimensions

length	80 inches (203 cm)
width	30 inches (76 cm)
height	64 inches (184 cm)
weight	230 lbs (105 kg)
shipping weight	340 lbs (155 kg)