60 Assembling and Maintaining TRM 800-Series Treadmills
Table 4. Active status light appearances and their meanings
Status light
appearance
Meaning Action required
Steady (solid)
blue
The treadmill is
operating normally and
does not currently need
maintenance.
None.
Pulsing blue The treadmill is due for
scheduled maintenance
(P80 console only), or
the treadmill belt needs
to be replaced (except
for 230 V models).
Perform the needed
maintenance, then reset
the status light.
Steady (solid)
yellow
The treadmill has
detected and recovered
from an error. It can still
be used, but some
functions may not be
available.
Refer to the console’s
event log for more
information.
Pulsing yellow The treadmill has
detected an error, has
been unable to recover
from the error, and has
taken itself out of
service.
Power-cycle the
treadmill (switch it off,
wait 30 seconds, then
switch it on again). If the
error occurs again,
check the console’s
event log for more
information, then
contact Precor
Customer Support.
To Next Page
Loading...
Need help?
General
