32 Operating and Maintaining the P80 Console
To change the Maintenance settings and view the
treadmill’s current status:
1. Use the administrator code and password to view the
equipment settings.
Note: A text message to the right of the Maintenance
command provides additional information about the
service the treadmill currently needs.
2. Touch Maintenance.
The Recommended Action heading on the Maintenance
screen advises you whether or not the treadmill needs
attention at this time. The three detail lines below this
heading provide additional information. You can touch each of
these detail lines for more information about the type of
maintenance that is due, and clear maintenance alerts using a
button at the bottom of each screen.
To view and clear … Touch … Then touch …
The scheduled maintenance
alert
Next Maintenance
Due
Reset
The treadmill belt
replacement alert
Belt Rating Replace
Alerts about logged system
errors
Operating Condition Reset
Under the Active Status Light heading, you can adjust the
appearance of the status light.
If you want to … Touch … And select …
Adjust the brightness of the
status light
AS Light Brightness Low,
Medium, or
High
Activate or deactivate the
pulsing blue alert for
scheduled maintenance or
belt replacement
Maintenance
Reminder
On or Off
To Next Page
Loading...
Need help?
General
