To Next Page
J
Jennifer JohnsJul 30, 2025
Why is there no picture or sound on my Precor Adapter channels?
- Kkristie64Jul 30, 2025
If you're experiencing a lack of picture or sound on certain channels with your Precor Adapter, there might be a few things to check. First, ensure that all cables are securely connected. Also, verify that the dialing sequences set in the channel guide are correct. If you're using I-O DATA receivers, confirm that the quick selection list on the receiver has been set up correctly and that the receiver is still set to 720p; if not, use a remote control to reconfigure the receiver.
General
