Chapter 2
Configuring P80 Consoles
After the external receivers have been installed and
configured, configuring P80 consoles to recognize them
involves the following tasks:
Activating the Media Adapter on each P80 console
Building the channel list on the first console
Exporting the finished channel list from the first console
to the others
This chapter discusses how to perform these tasks.
Editing the Channel Guide
Each P80 console contains a formatted text file, called
channel-guide.json, that describes the channel guide on that
console. Precor provides a software utility called the Precor
Channel Editor that makes creating or modifying this file easy.
Precor Customer Support will send you an email message
containing a hypertext link. Clicking the link downloads a .zip
archive file, which contains the installer and the user guide for
the utility. Refer to the user guide for instructions on how to
create and edit the channel guide file.
To Next Page
Loading...
