8 Installing the P80 Console Media Adapter
Configuring Receivers
To configure and test the external receivers that you plan to
use with P80 consoles, you must have the following tools
available:
HDMI-compatible monitor capable of displaying a 720p
signal at 60 frames per second
Infrared remote control from one of the receivers
Important: Before you start to configure the receivers, review and
familiarize yourself with their instructions. You must know how to
reach the configuration menus before you begin the following
procedure.
Tip: If possible, configure the receivers before you arrive at
the fitness facility. This prevents you from carrying the
monitor around the facility to configure each receiver as you
install it.
To configure each receiver:
1. Connect the receiver’s power supply to the receiver and
to an AC power outlet.
2. Connect the monitor to the receiver.
3. Connect the receiver to a source of an appropriate
television signal.
4. Turn on the receiver and use its configuration menus to
select the following options:
– 720p resolution (1280 x 720) x 60 fps
– Closed captioning (if the facility requires that closed
captioning be available, you must configure it within
the receivers)
To Next Page
Loading...
Need help?
General
