Page 9
For technical questions, please call 1-888-866-5797.
70476
SAFETYOPERATIONMAINTENANCE SETUP
Battery Charger / Maintainer Precautions
1. Do not expose Battery Charger / Maintainer
to rain or snow.
2. Use of an attachment not recommended
or sold by the Battery Charger / Maintainer
manufacturer may result in a risk of fire,
electric shock, or injury to persons.
3. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord when
disconnecting Charger / Maintainer.
4. Do not operate Charger / Maintainer with damaged
cord or plug – replace the cord or plug immediately.
5. Do not operate Charger / Maintainer if it has received
a sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified serviceman.
6. Do not disassemble Charger / Maintainer –
take it to a qualified technician when service
or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
7. To reduce risk of electric shock, unplug
Charger / Maintainer from outlet before
attempting any maintenance or cleaning.
8. Locate Charger / Maintainer as far away
from Generator as power cord permits.
9. Maintain labels and nameplates on the
Charger / Maintainer. These carry important
safety information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
10. Unplug the Battery Charger / Maintainer from its
electrical outlet before connecting its power cord
to the Generator, or performing any inspection,
maintenance, or cleaning procedures.
11. Do not use Charger / Maintainer while tired or under
the influence of drugs, alcohol or medication.
To Next Page
Loading...
