Need help?Do you have a question about the Preen AFV-P Series and is the answer not in the manual?
Provides an overview of the AFV-P series AC power supply.
Lists the main features and capabilities of the product.
Detailed technical specifications for AC and DC output, and measurements.
Visual representation of the product's physical appearance.
Identifies and describes the front and rear panel components.
Instructions for checking the product for damage after shipment.
Guidelines for preparing the environment and power source for the device.
Procedures for connecting the AC power input cord.
Procedures for connecting the AC/DC output terminals to the load.
Explains how to use the remote sense function for accurate voltage delivery.
Step-by-step guide to safely powering on the device.
Instructions for attaching the product handles.
Details on installing various interface cards like RS232, GPIB, PLC, and Analog.
Overview of local operation using touch screen and rotary knob.
Guide to interacting with the device's interface elements.
Description of the primary display screen and its functions.
Navigation through the device's menu options.
Access and configure Testing (ADVANCED/BASIC modes) and System settings.
Configure Ethernet, General, GPIB, and Analog communication interfaces.
View test results and step information.
Display output voltage and current waveforms.
View detailed measurement readings.
Display product model, firmware, and serial number.
Details on product protection features and error codes.
Configure name, voltage, and frequency for memory sets.
Select and switch between stored memory sets for output testing.
Introduction to programmable features for simulating power line conditions.
Configure sequential output changes for each memory set step.
Set output changes based on a specified slew rate.
Define output changes for specific durations and cycles.
Simulate phase angle control for dimming applications.
Calibrate the high-range voltage output for 310V.
Calibrate the low-range voltage output for 155V.
Calibrate the high-range voltage output for 60V.
Calibrate the low-range voltage output for 60V.
Calibrate the high-range RMS current measurement.
Calibrate the low-range RMS current measurement.
Calibrate the peak current measurement.
Calibrate the output socket current, specialized for AFV-P-5000.
Overview of remote control via software and interfaces.
Using the remote software in its basic operational mode.
Advanced programming and sequence creation using the remote software.
Includes resetting defaults and building custom output reports.
Recommendations and precautions for regular product maintenance.
General| Brand | Preen |
|---|---|
| Model | AFV-P Series |
| Category | Power Supply |
| Language | English |
To Next Page
