Need help?Do you have a question about the Preen AFV-P-5000 and is the answer not in the manual?
General safety precautions for product operation, service, and repair.
Guidelines for installing the device in a suitable environment and required space.
Critical warning and procedure for protective grounding connection.
How to use the touch screen for data input and confirmation.
Settings for IP mode, IP address, subnet mask, and default gateway.
Details on protection codes (OVP, LVP, OCP, OPP, OTP) and troubleshooting.
Entering the STEP page for a specific Memory Set.
Setting ramp time unit, time per unit, voltage per unit, and frequency per unit.
Enabling TRANSIENT feature, setting transient voltage and site.
General steps and required instruments for product calibration.
Pages for calibrating HI-Range and LO-Range voltages.
Steps to calibrate the HI-Range 310V output voltage.
Steps to calibrate the LO-Range 155V output voltage.
Steps to calibrate the HI-Range 60V output voltage.
Steps to calibrate the LO-Range 60V output voltage.
Steps to calibrate the HI-Range RMS current.
Steps to calibrate the LO-Range RMS current.
Steps to calibrate the peak current.
Steps to calibrate the output socket current for AFV-P-5000.
Description of controls for voltage, frequency, current, power, and waveforms.
General| Brand | Preen |
|---|---|
| Model | AFV-P-5000 |
| Category | Power Supply |
| Language | English |
To Next Page
