AFV-P Series High Performance Programmable AC Power Supply
107
7 Remote Operation
For remotely control the product via the remote control software released by Preen,
please refer to the file “READ ME” in the attached CD-ROM which is encased with the
product, so as to install the corresponding remote control software and device driver.
For SCPI command list, please refer to the file “READ ME” to find the SCPI program-
ming manual.
7.1 General
With the complete communication interfaces, the product can be controlled re-
motely via RS232, RS485 or USB. Additionally, the product provides the specialized
remote control software that allows users to easily setup the remote control for the
product without further need of programming. Please see the following figures,
Figure 7.1 User interface of the remote control software when the product output is off
Figure 7.2 User interface of the remote control software when the product output is on
To Next Page
Loading...
